Parquet and laminate cleaning guide

 Laminate flooring is suitable for people who need quick and easy cleaning. There are simple ways you can maintain your home floor for the new years. All you need to clean it is a vacuum cleaner and a tee. Of course, you can use laminate shampoo to clean the laminate and also laminate wax to polish the laminate, but we suggest using the same vacuum cleaner and T because of the low quality products entering the market.

• Use a vacuum cleaner to remove dust and fine particles from its surface.
• In case of spillage of water or other liquids (especially liquids that contain alkaline or acidic compounds), immediately dry and clean the area carefully so as not to damage the surface or inner layers of the laminate.
Avoid using common detergents (especially those that contain chemicals such as curry and ammonia) or soaps and detergents that have strong enzymes, and use laminated detergents instead if needed. You can use it for this purpose. (Like the products that say: Hard Surface Flooring Cleaner)
• Be careful that materials such as molten candles, inks, chewing gum, etc. that may stick to the surface and gradually make the exterior look a little ugly and even damaged (albeit slightly), do not stick to the surface. If this happens, use a laminate detergent and dry it thoroughly after it is completely clean. Or, if these materials are not available, first gently separate them with a little ice and then gently use a flat, thin device (such as a bank card-like plate or similar) Remove the spill on the laminate surface and collect from there. Of course, in this method, you must be careful not to scratch the surface in the last step. Then gently wipe the surface with a cloth.
When cleaning, make sure that the surface or the fabric used to dry and clean the laminate surface is not so thick and scratched that it does not cause any scratches or damage when applied to the floor surface. Does not.
• You do not need to use all kinds of cleaning and polishing tools and tools available in the market to completely polish and clean the surface. It is better to consult with the seller or experts before doing this.
• If you use water to clean laminate surfaces, in addition to drying it thoroughly after finishing work, make sure that the temperature is not too high and it is better that the water is lukewarm.